MSPA CHEMICAL KIT
TO MAINTAIN YOUR MSPA CRYSTAL CLEAR
B0301858 MSpa Chemical Starter Kit
(20 X 20g Bromine Tablets + 500ml Algaecide + Floating Dispenser) Carry box ，6sets/ctn
Disinfectant is for water spas and pools, disinfectant, algaecide and bactericide.
B0301859 Bromine Tablets - 50 X 20g Bottle
Slowly dissolve in water to provide active bromine sanitizer in the form of hypobromous acid.
B0301860 Chlorine Granules - 1Kg Bottle
Add isocyanuric acid to the spa water which resists chlorine loss from UV rays. Does not contain calcium, can be
used to sanitize
hard water without increasing the calcium hardness. Contains troclosene Sodium, dehydrate 100%.
B0301861 Algaecide - 1L Bottle
Kill all types of algae, including green and mustard algae. Non-foaming algaecide is for improving and conserving
water in spa.
Contain 7% of polymeric quaternary ammonium chloride.
B0301862 pH Plus - 1Kg Bottle
Increase the pH in the spa water. Contain 100% of sodium Carbonate.
B0301863 pH Minus - 1.5Kg Bottle
Decrease the pH in the spa water. Contain 100% of sodium bisulphate.
2.12 Where to find M spa serial number?
For Mspa produced before year 2014, please find Mspa serial
number on the spa pool, as the left picture shows, the serial number
is marked by red rectangle.
For Mspa produced on/after year 2014, please find the Mspa serial
number on the back of control panel, as the left picture shows, the
serial number is marked by red rectangle.
To Next Page
Loading...
Need help?
General