MTD 13AM762F765 - Seat Adjustment

brakeis inneedof adiustment,The brakedisccan be
foundon the rightsideof the transmissioninthe rearof
thetractor,Adiustif necessaryas follows:
1, Lookingat thetransmissionfromtherightsideofthe
tractor,locatethecompressionspringand brakedisc,
SeeFigure16,
2, Loosen,butdo NOTremove,the hexnutfoundon the
rightsideof the brakeassembly,SeeFigure16,
3, Usinga feelergauge,setthe gapbetweenthebrake
discandthebrakepuckat,011",
4, Re=tightenthehexnutloosenedearlier,
Seat Adjustment
_lj ARNING: Before operating this
machine, make sure the seat is
engaged in the seat stop, stand
behind the machine and pull back
on seat until fully engaged into
stop.
Standard Seat
Toadiustthepositionofthe seat,loosenthe two hex
screwson thebottomof theseat,Slidetheseatforward
or backwardas desired,Retightenthe twoscrews,See
Figure17,
Knob Adjustment Seat (if so equipped)
Toadiustthepositionofthe seaton modelssoequipped,
loosenthe twoknobsonthe bottomofthe seat, See
Figure18, Slidethe seatforwardor backwardas desired,
Retightenthe twoknobs,
Quick Adjust Seat (mrso equipped)
Toadiustthepositionofthe seaton modelsequipped
witha seatadiustmentlever,movetheseatadiustment
lever(locatedundertheseat)to the leftand slidetheseat
forwardor rearward,SeeFigure19,Makesureseatis
lockedintopositionbeforeoperatingthe tractor,
f
Set gap .011
Figure 16
Hex Nut
Figure 17
machine, make sure
the seat is engaged in ,I
the seat stop, stand }
behind the machine ;
and pull back on seat }
until fully engaged into i
stop.
zJ-•'•• ." ZY
Figure 19 Figure 18
21