11
8.6. Raise the middle sheave of the variable speed
pulley to allow raising the lower drive belt around
the belt guard. See Figure 33.
8.7. Using a 5/8” socket on an impact gun, remove
the bolt securing the engine pulley to the engine
crankshaft.
Figure 33
Variable Speed Pulley
Lower Belt
8.8. Carefully lower the pulley from the crankshaft
and remove the belt from around the engine pul-
ley. See Figure 34.
NOTE: There is a spacer between the pulley
and the engine. The larger flange side should
face up during assembly. See Figure 35.
8.9. Replace the lower drive belt in the reverse order
of disassembly.
Figure 34
Engine Pulley
Spacer
Figure 35
Flange Spacer Engine Pulley
Hex Bolt and Washer
www.mymowerparts.com
For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983
To Next Page
Loading...
Need help?
General
