Chapter 5: Lubrication
55
7. Reassemble the PCV.
8. Tighten the cover bolts to a torque of 27 in-lbs.
(3 Nm).
9. Inspect the PCV tubing for cracks, brittleness or
signs of leaking. Replace the PCV tube if any
are found. See Figure 5.13.
10. Re-assemble the engine by following the above
steps in reverse order.
11. Test run the engine before returning to service.
Figure 5.13
PCV tube
PCV
chamber
cover
Dimple
www.mymowerparts.com
For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983
To Next Page
Loading...
