36
Preset Programs 01–12
Preparations:
Make sure that DoloBravo is switched off. Cleanse the area of the skin which is to be treat-
ed with clean water. Following that, make sure that all plugs are completely connected to the
respective electrode sockets as well as device sockets. Place the the adhesive electrodes or the
vaginal-/rectal-probe according to the advices in pages 27-29 of this manual.
DoloBravo is operated by 4 batteries of type AA. Open the battery compartment at the back by
pushing down the lid and insert the batteries. Please ensure the correct polarity in accordance
with the markings. DoloBravo is now operational. If the battery voltage is too low, the battery-
symbol in the LCD-display will ash. Please replace the battery at this time. Empty batteries
constitute special waste and therefore have to be disposed of at an appropriate collection point.
Never dispose of batteries via domestic or household waste.
Adjustment:
1. Press the button „ON/OFF” once.
DoloBravo is now switched on. The last used program appears on the LCD-display.
Parameters programmed for the rst phase will be displayed as well as the quantity of all
phases, the actual treatment mode and the total treatment time.
Mode
Program
Time of Treatment
Quantity of Phases
Frequency
Pulse Width
To Next Page
Loading...
