MTS Systems Level Plus User Manual

When the ‘VCF TABLE SIZE’ screen is displayed, press the ‘+/-’ key to activate the table
copy function. The Level Plus system will prompt for the table number to copy ‘from’.
Enter the tank/table number that you want to copy FROM.
The Level Plus system will then prompt for the table number to copy ‘to’. Enter the
tank/table number that you want to copy TO.
The Level Plus system will now prompt the user to verify the tank/table numbers previ-
ously entered.
If these table numbers are incorrect, press the ‘Clear’ key to abort (cancel) the copy func-
tion and reenter the correct values.
After the ‘copy from’ and the ‘copy to’ table numbers have been verified to be correct,
press the ‘Enter’ key to start the copy process. The ‘COPY IN PROGRESS’ message will be
displayed.
CAUTION
Once the copy process has started there is no way to
cancel it. Once a table has been copied over by
another table, there is no way to recover the old table.
COPY VCF TABLE #X
TO VCF TABLE #Y
‘Clear’ TO ABORT
‘Enter’ TO CONTINUE
SELECT VCF TABLE #
TO COPY TO:
(1-8)
‘Enter’ TO CONTINUE
SELECT VCF TABLE #
TO COPY FROM:
(1-8)
‘Enter’ TO CONTINUE
TANK #X VCF TABLE
SIZE 10
‘Mode’ TO CHANGE
‘Enter’ TO CONTINUE
58

MTS Systems Level Plus Specifications

General

Brand	MTS Systems
Model	Level Plus
Category	Transmitter
Language	English