What to do if MTS Systems Transducer has improper wiring?
If you suspect improper wiring in your MTS Systems Transducer, carefully inspect all wiring connections to ensure they are correctly configured.
What to do if MTS Systems Transducer has incorrect receiver device or software?
If your MTS Systems Transducer isn't working as expected, verify that the receiver device and software being used are correct and compatible with the transducer.
What to do if MTS Systems Temposonics II LDT Transducer has circuit fault?
If you suspect a circuit fault within your MTS Systems Transducer, inspect or replace the transducer.
General| Technology | Magnetostrictive |
|---|---|
| Protection Class | IP67 |
| Rod Material | Stainless Steel |
| Output Signal | Analog |
| Linearity | ±0.02% of full scale |
| Operating Temperature | -40°C to +85°C |
| Housing Material | Aluminum |
| Electrical Connection | Connector or Cable |
| Category | Linear Displacement Transducer |
To Next Page
