6.17.3 Engine governor – Installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Engine oil
Damper
(→ Spare Parts Catalog) 8
Engine governor – Installation
1. Install engine governor as per overview drawing (→ Page 105).
Name Size Type Lubricant Value/Standard
Screw for ground‐
ing strap
M6x12 Tightening torque (Engine oil) Max. 8 Nm
2. Fit connector X1 and X3 on Engine Control Unit and engage locks.
3. Fit retainers for engine wiring.
Final step
u Enable engine start.
MS150094/01E 2012-08 | Task Description | 107
TIM-ID: 0000031642 - 001
To Next Page