EasyManua.ls Logo

MTU 16V 2000 C66 - Maintenance; Maintenance Task Reference Table

MTU 16V 2000 C66
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Maintenance
4.1 Maintenance task reference table [QL1]
The maintenance tasks and intervals for this product are defined in the Maintenance Schedule. The
Maintenance Schedule is a stand-alone publication.
The task numbers in this table provide reference to the maintenance tasks specified in the Maintenance
Schedule.
Task Maintenance tasks
W0500 Check engine oil level. (→ Page 69)
W0501 Visually inspect engine for leaks and general condition. (→ Page 30)
W0502 Check intercooler drain(s). (→ Page 30)
W0503 Check signal ring position of service indicator on air filter. (→ Page 30)
W0505 Check relief bores of water pump(s). (→ Page 30)
W0506 Check engine for abnormal running noises, exhaust color
and vibrations.
(→ Page 30)
W0507 Drain water and contaminants from fuel prefilter. (→ Page 30)
W0508 Check reading on differential pressure gauge of fuel prefilter. (→ Page 30)
W1001 Replace fuel filter or fuel filter element. (→ Page 58)
W1003 Check drive belt condition and tension, replace if necessary. (→ Page 94)
W1005 Replace air filter. (→ Page 65)
W1006 Replace fuel injectors. (→ Page 48)
W1008 Replace engine oil filter when changing engine oil, or when
the interval (years) is reached, at the latest.
(→ Page 71)
W1009 Check layer thickness of the oil residue, clean out and re‐
place filter sleeve, at each oil change, at the latest.
(→ Page 72)
W1178 Replace pressure pipe neck in cylinder head. (→ Page 54)
W1207 Check valve clearance, adjust if necessary. Attention!First
adjustment after 1,000operating hours!
(→ Page 44)
W1244 Check function of rod electrode. (→ Page 101)
W1245 Check alarm function of differential pressure gauge. (→ Page 100)
W1246 Check pump capacity. (→ Page 102)
W1523 Check operation of flaps and actuators. (→ Page 68)
W1525 Replace NOx sensor. (→ Page 110)
W1526 Replace Lambda sensor. (→ Page 110)
W1547 Replace oil mist separator. (→ Page 43)
W1636 Reset drift correction parameters (CDC) and enter coding of
injectors (IIG).
(→ Page 117)
Table 1: Maintenance task reference table [QL1]
36 | Maintenance | MS150094/01E 2012-08
TIM-ID: 0000022887 - 003

Table of Contents

Related product manuals