Replacing filter element on sin-
gle-stage filter
1. Close fuel shutoff valve.
2. Open threaded vent plugs (1) of contaminat-
ed filter.
3. Unlock drain valve (5) by pressing toggle and
open it.
4. Drain fuel from the filter.
5. Close drain valve (5).
6. Remove screws securing cover (2) and open
filter cartridge housing.
7. Remove level monitor (3) and filter cartridge
(4).
8. Insert new level monitor (3) and new filter
cartridge (4).
9. Place new gasket in filter cartridge housing.
10. Close filter cartridge housing and tighten
screws (2).
11. Open fuel shutoff valve and fill filter with fuel.
12. Close threaded vent plugs (1) when fuel
emerges.
13. Set differential pressure display instrument
(→ Page 100).
Replacing filter element with re-
versible duplex filter
1. Cut out the filter to be replaced (A or B):
1 Filter A cut out
2 Filter B cut out
MS150119/01E 2016-02 | Fuel Filter | 109
TIM-ID: 0000064789 - 002
To Next Page
Loading...
