MTU 16V2000M96L - Injection Pump; HP Pump; HP Fuel Pump - Filling with Engine Oil

7.5 Injection Pump / HP Pump
7.5.1 HP fuel pump – Filling with engine oil
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Engine oil
WARNING
Fuels are combustible and explosive.
Risk of fire and explosion!
• Avoid open flames, electrical sparks and ignition sources.
• Do not smoke.
• Wear protective clothing, protective gloves, and safety glasses / facial protection.
WARNING
Oils/oil vapors are combustible/explosive.
Risk of fire and explosion!
• Avoid open flames, electric sparks and ignition sources.
• Do not smoke.
NOTICE
HP fuel pump not filled with engine oil.
Damage to components, major material damage!
• Ensure that th HP fuel pump is filled with engine oil before it is installed or put into operation.
Filling HP pump
Note: Pump is delivered with filler neck.
1. After installation, connect oil line to (1).
2. Fill HP pump with engine oil using pump oiler
until engine oil emerges.
MS150119/01E 2016-02 | Injection Pump / HP Pump | 87
TIM-ID: 0000055243 - 003