7.13.2 Engine oil – Change
Preconditions
☑ Engine is stopped and starting disabled.
☑ Engine is at operating temperature.
☑ MTU Fluids and Lubricants Specifications (A001061/..) are available.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Engine oil
WARNING
Engine oil is hot.
Engine oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Allow the engine to cool to below 50 °C before beginning work.
• Wear protective clothing, protective gloves, and safety glasses / facial protection.
• Avoid contact with skin.
• Do not inhale oil vapor.
Version with extraction equipment: Engine oil extraction
1. Position a suitable container to drain the engine oil into.
2. Extract all engine oil from oil pan using the extraction equipment.
Filling with new engine oil
1. Determine amount of engine oil required for
oil change (→ Page 43).
2. Open cap (1) on filler neck.
3. Pour engine oil in at filler neck up to “max.”
mark at oil dipstick.
4. Close cap (1) on filler neck.
5. Check engine oil level (→ Page 118).
6. After oil change, bar engine with starting sys-
tem.
MS150119/01E 2016-02 | Lube Oil System, Lube Oil Circuit | 119
TIM-ID: 0000055250 - 002
To Next Page
Loading...
