MTU 8V4000Mx4 - Accessories for (Electronic) Engine Governor; Control System

7.23 Accessories for (Electronic) Engine Governor / Control System
7.23.1 Resetting CDC parameter and entering IIG with DiaSys®
Preconditions
☑ Engine is stopped and starting disabled.
Note: If the parameters for the drift correction (CDC) are not reset, the emission certification becomes invalid.
Resetting parameters for drift correction (CDC) with DiaSys®
1. Use DiaSys® to reset the CDC parameters (→ Dialog system DiaSys® E531920/..).
2. If no DiaSys® is available, contact Service.
Entering the codes for the injectors (IIG) with DiaSys®
1. Use DiaSys® to enter the IIG (→ Dialog system DiaSys® E531920/..).
2. If no DiaSys® is available, contact Service.
MS150109/01E 2015-11 | Task Description | 255
TIM-ID: 0000045613 - 001