EasyManua.ls Logo

MTU 8V4000Mx4 - Maintenance; Maintenance task reference table [QL1]

MTU 8V4000Mx4
278 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 Maintenance
5.1 Maintenance task reference table [QL1]
The maintenance tasks and intervals for this product are defined in the Maintenance Schedule. The Mainte-
nance Schedule is a stand-alone publication.
The task numbers in this table provide reference to the maintenance tasks specified in the Maintenance
Schedule.
Task
Option
Maintenance tasks
W0500 Check engine oil level. (→ Page 219)
W0501 Visually inspect engine for leaks and general condition. (→ Page 76)
W0503 X Check maintenance indicator of air filter. (→ Page 217)
W0504 Check telltale bores of HP fuel pump. (→ Page 76)
W0505 Check relief bores of coolant pump(s). (→ Page 239)
W0506 Check engine for abnormal running noises, exhaust color
and vibrations.
(→ Page 76)
W0507 X Drain water and contaminants from fuel prefilter. (→ Page 76)
W0508 X Check reading on differential pressure gauge of fuel prefil-
ter.
(→ Page 76)
W1001 Replace fuel filter or fuel filter element. (→ Page 198)
W1005 Replace air filter. (→ Page 215)
W1006 Replace fuel injectors. (→ Page 186)
W1008 X Replace engine oil filter when changing engine oil, or when
the interval (years) is reached, at the latest.
(→ Page 226)
W1009 X Check layer thickness of the oil residue, clean out and re-
place filter sleeve during every oil change at the latest.
(→ Page 231)
W1011 Perform endoscopic examination. (→ Page 175)
W1016 X Check condition of coupling. (→ Page 245)
W1047 X Check and clean oil indicator filter. (→ Page 220)
W1076 Clean compressor wheel. (→ Page 209)
W1207 Check valve clearance, adjust as necessary. IMPORTANT!
First adjustment after 1,000 operating hours, and after
1,000 operating hours following cylinder head overhaul.
(→ Page 181)
W1244 X Check function of rod electrode. (→ Page 250)
W1245 X Check alarm function of differential pressure gauge. (→ Page 249)
W1246 X Check pump capacity. (→ Page 251)
W1463 Check general condition of engine mounting (visual inspec-
tion).
(→ Page 246)
W1481 X Replace intermediate fuel filter or filter element. (→ Page 196)
W1675 X Replace fuel prefilter or fuel prefilter element. (→ Page 205)
W1713 Injector: Reset drift correction parameter (CDC). (→ Page 255)
Table 2: Maintenance task reference table [QL1]
92 | Maintenance | MS150109/01E 2015-11
TIM-ID: 0000065048 - 001

Table of Contents

Related product manuals