MTU 8V4000Mx4 - Page 63

General operating data
(I) Engine-mounted heat
exchanger
Remote heat ex-
changer
Firing speed, from R rpm 80 80 80 80
Firing speed, to R rpm 120 120 120 120
Starter (electric)
(I) Engine-mounted heat
exchanger
Remote heat ex-
changer
Rated starter voltage (standard design) R V= 24 24 24 24
Starter (with compressed air/hydraulic starter motor)
(I) Engine-mounted heat
exchanger
Remote heat ex-
changer
Starting-air pressure before starter, min. R bar 8 8 8 8
Starting-air pressure before starter, max. R bar 10 10 10 10
Inclinations, standard oil system (reference: waterline)
(I) Unit Engine-mounted heat
exchanger
Remote heat ex-
changer
Longitudinal inclination, continuous max.
driving end down (Option: max. operating
inclinations)
L Degrees
(°)
20 20 20 20
Longitudinal inclination, temporary max.
driving end down (Option: max. operating
inclinations)
L Degrees
(°)
22.5 22.5 22.5 22.5
Longitudinal inclination, continuous max.
driving end up (Option: max. operating in-
clinations)
L Degrees
(°)
15 15 15 15
Longitudinal inclination, temporary max.,
driving end up (Option: max. operating in-
clinations)
L Degrees
(°)
17.5 17.5 17.5 17.5
Transverse inclination, continuous max.
(Option: max. operating inclinations)
L Degrees
(°)
15 15 15 15
Transverse inclination, temporary max.
(Option: max. operating inclinations)
L Degrees
(°)
22.5 22.5 22.5 22.5
Capacities
(I) Unit Engine-mounted heat
exchanger
Remote heat ex-
changer
Engine coolant, engine side (with cooling
system)
R Liters 207 207 -- --
Engine oil on initial filling (standard oil
system) (Option: max. operating inclina-
tions)
R Liters 190 190 190 190
MS150109/01E 2015-11 | Technical Data | 63
TIM-ID: 0000045046 - 003