55
Fuse Location 5
Located directly behind the Mudd-Ox instrument panel is the
Kubota engine wiring harness. There may be fuses. See engine
owner’s manual for information.
Engine Coolant Temperature Sensor
This sensor “L” turns on the cooling fans once operating tem-
perature is reached. It’s located on the top rear of the engine,
above the alternator belt.
Winch Contactor
Directly behind the control levers, under the Mudd-Ox dash, is
the winch contactor “K”. It’s mounted to the frame.
LL
Electrical Cont.
KK
Hydraulic Oil Temperature Sensor
This sensor “M” is used for displaying temperature on the in-
strument panel. It’s located on the top front of the hydraulic oil
tank.
MM
To Next Page
Loading...