Using the joystick
If an AUX-2 operating device (e.g.: joystick) is detected, an overview of the configured button
assignment is shown every time the terminal is started.
You have started the terminal.
1. The button assignment will be loaded.
2. The following message appears: “Confirm or discard the AUX button assignments in the
following screen."
3. - Confirm.
⇨ A screen with the current button assignment appears.
4. Check whether the displayed button assignment is correct.
5. - Accept the button assignment or discard the button assignment.
To Next Page
Loading...
Need help?
General
