Table of Contents
1. PRECAUTONS 3
1.1 WARNING 3
1.2 CAUTION 3
1.3 Operation environmental condition 3
2. ACCESSORIES 4
3. INTRODUCTION 4
4. SPECIFICATIONS 5
5. INDICATORS and CONTROLS 6
5.1 Display and Indications 6
5.2 Control Buttons and Knobs 7
5.3 Back Panel 8
6. OPERATION PROCEDURES 8
6.1 Adjusting Output Voltage and Current 8
6.2 Upper Voltage and Current Limit adjustment 9
6.3 Select and adjust 3 preset value of Voltage and Current 10
6.4 Output ON / OFF (Include power up ON / OFF setting) 10
6.5 Lock / Unlock of front panel 10
6.6 Watt meter and Amp meter selection 10
6.7 Ramp Up / Ramp Down generator 11
6.8 Master / Slave configuration 15
6.9 Factory reset 16
6.10 Remote control interface selection 16
To Next Page
Loading...
