5.3 Back Panel
➀
USB communication port
➁
Remote sensing terminals
➂
DC output terminal which has same power rating
as the front output
④
Master/Slave connection
➄ AC INPUT SOCKET
➅ ETHERNET port (Not Included)
6. OPERATION PROCEDURES
6.1 Adjusting Output Voltage and Current
Adjust Output Voltage:
Rotate Voltage Knob clockwise to INCREASE output voltage
Rotate Voltage Knob anti-clockwise to REDUCE output voltage
Press Voltage knob to switch between COARSE and FINE adjustment. When press the knob
the digit will been high-lighted for adjust.
Adjust Output Current:
Rotate Current Knob clockwise to increase output voltage
Rotate Current Knob anti-clockwise to reduce output voltage
Press Current knob to switch between COARSE and FINE adjustment. When press the knob
the digit will been high-lighted for adjust.
Upper Voltage and Current Limit adjustment
P.8
To Next Page
Loading...
Need help?
General
