MD-1000I / MD-2000I / MD-3000I Introduction
1.8 Installation Site
Do not install in an area where flammable vapours are present, for exam-
ple, petrol/gasoline, storerooms, areas in which combustion-driven mo-
tors operate, etc.
The UPS appliance is designed for operation in ventilated rooms with ambient
temperatures of 0 to 40° C.
If the UPS is subject to significant and quick temperature changes, condensa-
tion may develop. Should this be the case, it is necessary to give the unit at
least 2 hours to acclimate.
Never place, install or operate the UPS in a damp environment. Keep fluids at
a suitable distance away from the unit.
Do not place, install or operate the UPS near a source of heat.
You may install the UPS in either a horizontal or a vertical position. Vertical in-
stallation requires you use the feet; horizontal requires the use of a 19-inch
rack.
Install and maintain a minimum distance of 10 cm from the appliance's back
and front to other objects to ensure the UPS has enough air circulation to pre-
vent high temperatures. Make sure the air vents are free of blockage through
paper or other materials that might be stuck in the intake openings.
MD Series 14
To Next Page
Loading...
