MD-1000I / MD-2000I / MD-3000I Software
9. Software
Connect the RS-232 or USB cable connector to the UPS communication
port.
Connect the RS-232 or USB cable socket to a suitable RS-232/USB com-
puter port.
A suitable software package can monitor and process UPS settings and opera-
tional status via communication port.
Software is available from the manufacturer, distributor or the provided hotline,
where you'll receive useful information for selecting the most suitable software
based on your needs and UPS.
Visit our Web site for further information:
http://www.edelstrom-usv-systeme.de
The follo
wing basic functions are supported by any software package:
– Identification and display of UPS power source status
– Display of UPS output status
– Identification and display of the battery string charge status
– Shutting down open applications if power fails
– Shutting down operating system
– Generating log files
– General monitoring of UPS data and conditions (diagnostics)
You'll find more detailed information about the individual software packages,
such as installation, operation and scope in the software manual.
In Chapte
r "Included Components and Accessories," you'll find a suitable,
tested software package.
MD Series 81
To Next Page
Loading...
