MD-1000I / MD-2000I / MD-3000I System Operation and Display
MD Series 64
7. System Operation and Display
7.1 UPS Modes and Display Messages
s
Operating this system involves different operational modes and control com-
munications.
7.2 USP User Instruction
The user of this UPS system must invariably follow and adhere to the in-
structions and guidelines provided in this manual at all times. The user
may perform only those actions described in the following and the user
must perform them with great care:
Controls: energizing the UPS and switching it on and off
Reading the display and interpreting audible warnings
Activating the test operation
Use the communication interface, but if the UPS installation includes a
permanent connection, the connection to a PC or other systems should be
already present.
Thanks to comprehensive protective and safety functions that the UPS
performs in conjunction with the connected equipment, the UPS's opera-
tion is completely automatic. The user need only energize and turn the
unit on and off. In addition, communication interfaces allow the transfer
of data via SNMP adapter, which, however, is not necessary for the regu-
lar operation of the system.
To Next Page
Loading...