www.multispanindia.com
Page-2
DSM-14N
Parameter Display
Phase Neutral Voltage ( Vpn )
30 - 300 V
50mA -5A (Direct without CT)
50 - 500 V
0.000 - 9999 KW
0.000 - 9999 KW
000.000 - 999999 KWh
000.000 - 999999 KVAh
0.000 - 9999 KVArh
0.10 - 1.00
0.10 - 1.00
0.000 - 9999 KVA
9999.59 Hrs/Min.
0.000 - 9999 KVAr
1500 RPM
45 - 65 Hz
9999.59 Hrs/Min.
Line CURRENT ( ~A )
Line Voltage (Phase-to-Phase) ( Vpp )
Active Power ( KW ) Total
Active Power per Phase(KW)
Active Energy ( KWH )
Apparent Energy ( KVAh )
Reactive Energy ( KVArh)
Power Factor ( PF ) Average
Power Factor per phase ( PF )
Apparent Power (KVA )
Load hours
Reactive Power ( KVAr )
RPM
Frequency ( Freq )
No load hours
Measurement Range
To select connection press key and power on the instrument.
To save the connection power off the instrument.
Change by key
3 Phase/3wire
3 Phase/4wire
Upper Display
Lower Display
C O n e
C O n e
3 P 3 w
3 P 4 w
Wiring Connection
Parameters
MD KW
MD KVA
MD KVAr
0.000 - 9999 KW
0.000 - 9999 KVA
0.000 - 9999 KVAr
To Next Page
Loading...
