clip removal
valve
opening tool
To maximize battery life, cancel all alerts as soon as
possible and turn off your pager when not in use. If you do
not plan to use your pager for an extended period of time,
it is recommended that you remove the battery from it.
To replace the battery, make sure the pager is turned off and
do the following:
supplier of cell and chemical products it is made up of, in
particular for rechargeable batteries.
NOTE: All recorded messages will be retained by the
pager for approximately 12 hours when the battery is removed
or the pager is turned off.
Hold the pager in one hand, front side down. Using your
thumb or index finger, gently slide the clasp in the
direction indicated by the arrow. Insert the end of the supplied
valve removal tool or similar thin blade (for example, a small
screwdriver) into the opening in the side of the valve
and gently lift it out of its notch.
9261 – 9629 Issue 2 18
RPR 950 Series
Machine Translated by Google
To Next Page
Loading...