EasyManua.ls Logo

Munters MK30D - 2 Installation; Electrical Connection

Munters MK30D
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Dehumidier M KD-series
2Installation
Place the dehumidier
in the middle of a room if possible to ensure good air circulation
w here air can be sucked in freely through the lter and blown out on the opposite side
with a minimum distance on the supply air side from a wall of about 600 mm. T he minimum distance on
the dry air side should be 3 m
away from any source of heat e.g. a radiator
In addition, ensure that windows and doors are closed in the room to be dehumidied.
2.1 Electricalconnection
The dehumi
dier is complete with cable and plug and ready for c onnection to a 230V/50Hz socket with a
10A fuse o
r a 16A circuit breaker.
190TEN-1071-C1304 Installation 6

Related product manuals