Muratec MFX-3091 Quick Start Guide

- 19 -
Installing Your Machine
1
Machine Setup
Loading Paper
Your machine has two built-in trays (tray 1 and MP tray) and an optional tray (tray 2).
This section explains the supported paper and capacity of tray 1 and how to load paper into the tray 1.
After you load paper, you need to register the loaded paper on your machine.
To complete the loading procedures, follow the 2 steps below:
● “Step 1 Loading Paper into Tray 1” P.19
● “Step 2 Conguring the Settings for Tray 1” P.20
 Tray 1 Specication
Supported paper size Paper capacity Paper weight
● A4
● A5*
● B5
● A6*
● Letter
● Legal 13
● Legal 13.5
● Legal 14
● Executive
● Statement
● 16K (184 x 260 mm)
● 16K (195 x 270 mm)
● 16K (197 x 273 mm)
● Custom*
250 sheets
(when paper weight is 80 g/m
2
)
● Light
60 to 63 g/m
2
(16 to 17 lb)
● Medium Light
64 to 74 g/m
2
(18 to 19 lb)
● Medium
75 to 87 g/m
2
(20 to 23 lb)
● Medium Heavy
88 to 104 g/m
2
(24 to 27 lb)
● Heavy
105 to 122 g/m
2
(28 to 32 lb)
Note
● Duplex printing cannot be performed on paper marked with “*”.
Reference
● For the specications and how to load paper in tray 2 (optional), MP tray, and manual feeder, refer to the User’s Manual
(Basic) > “1. Setup” > “Loading Paper and Documents” > “Paper” > “Loading Paper”.
Step 1 Loading Paper into Tray 1
1
Pull out tray 1.
2 Slide the paper guide (1) to the width of
the paper to be loaded.
1
3 Slide the paper stopper (2) to the length
of the paper to be loaded.
2

Muratec MFX-3091 Specifications

General

Brand	Muratec
Model	MFX-3091
Category	All in One Printer
Language	English