Muratec MFX-3091 - Fcode Transmission

- 21 -
Printing Conguration
1
Machine Setup
●● Printing Conguration
This section explains how to print the Conguration on which you can check the detailed information of
your machine, such as the settings and status of your machine.
When you nished the initial setup, follow the procedure below to conrm that the machine is properly
installed.
Printing Procedure
1 Press the <SETTING> key on the
operator panel.
2 Check that [Reports] is selected and
press
OK
.
3 Check that [Conguration] is selected
and press
OK
.
4 For the conrmation message, check
that [Yes] is selected and press
OK
.
When the Conguration is properly printed, the
initial setup has succeeded.