Section 78 00-02-0604
08-08-07 - 3 -
Remote Keypad
The Remote Keypad works with Murphy’s PV1000 and HV1000 model displays. It allows a
user to enter keypad commands whenever display installations are not conveniently located for
easy access.
The keypad contains the same navigation, menu and selection keys as found on the displays,
making it an easy transition to use. Fault lights, just like the ones found on the displays, are
located in the corners of the keypad. An audible alarm with a one-touch key for temporarily
disabling is provided, making it easy to recognize and address faults and alarms.
Specifications
I. Electrical
Processor: PIC18F2510
Flash Memory: 32 Kbytes
RAM: 1536 bytes SRAM
Backlighting: LED, 7400 mcd
Operating Voltage: 6 to 32 VDC, protected against
reverse polarity and load-dump
Power Consumption: 3.2 W maximum
Connection: 2 Deutsch DT 6-pin connectors
Keyboard: 7 Membrane Switch Keys
Audible Alarm: 70dB minimum
I. Environmental
Operating Temperature: -40 to 70°C (-40° to 158°F)
Storage Temperature: -55 to 85°C (-67° to 185°F)
Emissions: SAE J1113, IEC 60945, EN 12895,
EN 61000
I. Mechanical
Mounting Type: Screw-on clamp
Dimensions (W x H):
• 3.88 x 3.88 inch (Landscape)
• Panel Mount Depth – 0.5922 inch
• Unit Depth – 2.173 inch
Cutout for Panel Mounting
(Diameter): 2.062 inch
Case Material: Polycarbonate
Weight: 0.4 lb (180 g)
To Next Page
Loading...
Need help?
General
