Section 78 00-02-0604
08-08-07 - 8 -
Setting Up your HV1000 Display for the First Time
The guidelines presented below are intended for setting up the HV1000 display for the first
time. Once the configuration is set up, there is no need to revisit or change any of the settings.
NOTE: If you require assistance during the set up process, contact FW Murphy
customer support at (918) 317-4100.
1. At the main menu, press the Next button to move the highlight bar through the options
until ‘Utilities’ is highlighted.
2. Press Select. The Utilities sub-menu is displayed.
To Next Page
Loading...
