Need help?Do you have a question about the MUSTOOL MT8208 and is the answer not in the manual?
General| Brand | MUSTOOL |
|---|---|
| Model | MT8208 |
| Category | Multimeter |
| Language | English |
Details the key capabilities and specifications of the digital oscilloscope multimeter.
Explains the purpose and operation of the instrument's various buttons and controls.
Instructions on how to turn the instrument on and off safely and correctly.
Describes the automatic sleep function and how to disable it for continuous operation.
Guide on switching to and from oscilloscope mode, and its limitations.
Details the information displayed on the screen when the instrument is in oscilloscope mode.
Explains how to use function buttons (F1-F4) for oscilloscope adjustments and menus.
Instructions on adjusting the time base (t/div) for waveform display.
Guide on adjusting the vertical amplitude (V/div) of the displayed waveform.
Details on setting trigger edge, mode, and level for stable waveform capture.
Procedure to adjust the trigger level and reset it.
Explanation of different trigger modes: Auto, Normal, and Single.
Information on automatic waveform capture, its availability, and signal requirements.
Explanation of status indicators like Auto, wait, Trig, and Stop during scanning.
Steps for performing a single trigger capture of a waveform.
Methods to hold the current waveform for closer observation.
How to save and retrieve recorded waveforms from the instrument's memory.
Instructions to switch to and operate the multimeter mode.
Explanation of the main display elements when using the multimeter.
How to change between different multimeter measurement functions using the rotary knob.
Guide on using auto range and manual range selection for measurements.
How to use the Relative Value (REL) mode to measure differences from a reference.
Using the Peak Hold (P-H) mode to display maximum and minimum measurement values.
Detailed procedure for measuring AC and DC voltages with safety precautions.
Instructions for measuring AC and DC currents, including safety warnings.
How to measure frequency and duty cycle, including signal amplitude requirements.
Steps and safety precautions for measuring electrical resistance.
Procedure for testing diodes, including voltage drop characteristics.
How to perform a continuity test using the instrument's buzzer.
Guide on measuring capacitance, with safety notes about charged capacitors.
Specific instructions for measuring large capacitance values (up to 10mF).
How to freeze the current measurement reading and display status.
Instructions for saving and retrieving measurement data from the instrument's database.
Overview of the instrument's general specifications and physical characteristics.
Detailed technical specifications related to the oscilloscope functionality.
Specific technical data and accuracy for multimeter measurement functions.
Explanation of the various symbols and icons used on the instrument's display.
Information about the standard package contents and optional accessories.
Important advice on maintaining the instrument's dryness for proper operation.
Guidelines for optimal storage and usage temperatures to ensure longevity.
Precautions for handling the instrument to prevent physical damage.
Instructions for cleaning the instrument's exterior.
Procedure for replacing the protective fuse tube.
Information and warnings regarding instrument repair and unauthorized modifications.
Common issues and self-help steps for diagnosing and resolving instrument problems.
Steps for replacing the instrument's batteries when the power indicator is low.
To Next Page
