MUSTOOL MT8208 User Manual

31
COM
Reference end of measurement
avg
Average value
ERASE
Erase record
LEVEL
Trigger level
SAVE
Save current signal to memory
RESET
Trigger level to zero
Normal
Normal trigger means
Single
Single-time waveform
Auto
Automatic trigger mode
Trig
Scan trigger
Wait
Ready to wait for trigger
Stop
Hold waveform
TIME
Time base
RANGE
Amplitude
Complete sets and options of the instrument
Standard fittings of instrument: one mainframe, a pair of low-noise
test leads, one Oxford bag and one product manual
ADP05 high voltage attenuation probe
ADP05 adopts high resistance over 15000V and multimeter input resistance to form 10:1
partial voltage,Expand the DC voltage measurement range to 10000V. During the measurement,
the meter is set to 4000V manual range and the reading is X10.
ADP08 adapter (including high-frequency shielded test leads)
It is difficult to completely eliminate interference by using a multimeter's test meter to perform waveform
detection.In order to meet the needs of high-quality testing, users can purchase high-frequency shielded test leads and
ADP08 conversion connectors.One end of the ADP08 conversion connector is inserted into the multimeter socket,
and the other end is connected to the socket of the high-frequency shielding test line.

MUSTOOL MT8208 Specifications

General

Brand	MUSTOOL
Model	MT8208
Category	Multimeter
Language	English