MUTOH valuejet 1614 Manual

Page 8/19 AP-76942_Rev 1.0
3 Cleaning the cleaning wiper
(1) Cleaning frequency
Once a week, or when blurs or lacking parts appear on printed media after head cleaning.
(2) Cleaning procedures
 Use the cleaning stick moistened with suitable cleaning liquid to clean the cleaning wiper.
Step 1: If the printer is powered ON, make sure that printing or other operations are not in
progress.
Step 2: Display the CR Maintenance menu
 Press the [Menu] key
 “Menu1: Setup>” is displayed.
 The operation panel shifts to the Setup menu display.
 Press [>].
 “Set1: User Type” is displayed.
 Press [+] or [–] to select “Set20: CR Maintenance”.
 Press [Enter].
 “CR Mainte.: Start” is displayed.
 The display enters the CR Maintenance menu.
Important
 Please make sure the wiper is in optimal condition. If you do not clean the wiper
regularly, ink residue will stick to the wiper (as shown below), which will lead to
bad printing quality.

MUTOH valuejet 1614 Specifications

General

Brand	MUTOH
Model	valuejet 1614
Category	Printer
Language	English