MUTOH Belgium nv
Archimedesstraat 13
8400 Oostende - Belgium
www.mutoh.eu
Tel +32(0)59 56 14 00
Fax +32(0)59 80 71 17
BTWBE 0441.745.423
RPR Oostende
AP-76943_Rev 1.0 Page 1/19
Dear customer,
Each ink has its own specific drying speed and drying characteristics, which has an influence on
its periodical maintenance cycle.
To maximise the life-time of all parts which are exposed to ink, it is crucial to carry out some easy
but important maintenance.
The most important maintenance actions are:
Wash away ink remainders from parts which are not (easily) accessible, avoiding that the ink
dries out, possibly causing blockage.
Regularly remove ink remainders from accessible parts.
Hereafter, tailored to each ink type, you will find simple guidelines explaining how you can
maintain excellent print quality and avoid that parts wear untimely.
Overview
When using the VJ-1638 / VJ-1638Xit is important to perform periodic maintenance. This will
help you maintaining excellent output quality and avoid parts to wear untimely. Depending on
your current ink setup, follow the required periodical maintenance scheme.
1) When using Eco ink
2) When using UMS ink
ValueJet 1638 / 1638X
Regular maintenance using Mutoh UMS or Eco-Ultra ink
To Next Page
Need help?
General