Need help?Do you have a question about the MUTOH ValueCut VC-600 and is the answer not in the manual?
Identifies the VC-600, VC-1300, and VC-1800 models of the cutting plotter.
Details changes and updates across different document revisions, noting specific page modifications.
Covers personal, electrical tool, and general site safety for proper and safe operation.
Outlines the manual's scope, content, and provides contact details for technical assistance.
Explains the system's functional blocks, components, and their interconnections.
Details the electrical connections for various components on the main board.
Step-by-step guide to remove end, front, back, and top covers for access.
Instructions on unlatching and removing pinch roller assemblies.
Steps to loosen the carriage belt and successfully remove the tool carriage.
Detailed steps for removing and replacing the Y-motor unit.
Instructions for safely disconnecting and replacing the VCM PC board.
Steps for connecting or replacing the main board to prevent damage.
Guide for updating the machine's firmware to the latest version.
Steps to back up user settings before firmware operations or restore.
Guide to reset all machine settings, including backed-up values.
Steps to restore previously backed-up settings to the machine.
Instructions for setting default parameters using the parameter record card.
Procedure for replacing fuses, noting model-specific fuse positions.
Steps for adjusting the tool carriage transmission belt tension.
Instructions for adjusting the X motor tension belt to the correct tension.
Instructions for adjusting the Y motor tension belt to the correct tension.
Introduction to the diagnostic features for checking hardware components.
Visual representation of the diagnostic test flow and key sequences.
Tests for SRAM, DRAM, and Lever Sensor to diagnose faults.
Tests for X/Y motor and tool holder encoders to check for defects.
Tests for drum and carriage movement to diagnose motor or driver issues.
Tests for RS-232, Printer, and USB port connectivity.
Solutions for poor line quality at corners or endpoints.
Troubleshooting issues where pinch roller position is not detected correctly.
Solutions for the 'Set New Origin' function not working as expected.
How to fix media shifting issues during long drawing operations.
Causes and fixes for wavy lines and data loss during plotting operations.
Solutions for carriage lock, keyboard malfunction, and abnormal machine noise.
Fixes for unexpected lines on plots and issues with unexpected tool force.
Lists control panel and motor assembly parts with part numbers and locations.
Lists flat cable, pinch roller, and sensor assembly parts with part numbers.
Lists carriage assembly, main board, and power supply parts with part numbers.
Lists pinch roller and various belt types with part numbers.
Lists items like cutting blades, pens, and cutting pads.
Lists optional accessories such as stands and cables.
To Next Page
General