Need help?Do you have a question about the MUTOH ValueCut II VC2-600 and is the answer not in the manual?
General| Type | Vinyl Cutter |
|---|---|
| Max Cutting Width | 600 mm |
| Min Media Width | 50 mm |
| Connectivity | USB |
| Maximum Media Thickness | 0.5 mm |
| Software Resolution | 0.025 mm |
| Repeatability | ± 0.1 mm |
| Interfaces | USB 2.0 |
| Power Supply | AC 100-240 V |
| Weight | 12 kg |
| Blade Force | 30 - 350 gf |
Covers safety warnings and correct operation methods for safe usage.
Instructions for assembling the stand and media support.
Steps for installing the blade and configuring automatic length detection.
Instructions for loading sheet and roll media correctly.
How to set and test cutting parameters.
Guidelines for marks and procedures for contour cutting.
Solutions for power issues, error messages, and general operational failures.
Solutions for poor cutting results related to blade, force, or dirt.
Steps for creating designs, setting up jobs, and executing cuts.
Solutions for common software-related problems.
To Next Page