Need help?Do you have a question about the MUTOH ValueCut Series and is the answer not in the manual?
General| Connectivity | USB |
|---|---|
| Supported Media Types | Vinyl |
| Power Supply | AC100~240V, 50/60 Hz |
| Resolution | 0.025 mm |
| Operating Systems | Windows |
| Weight | Varies by model |
Essential safety warnings and precautions before operating the cutting plotter.
Overview of ValueCut series cutting plotters and their capabilities.
List of items included in the ValueCut package for different models.
Key features and benefits of the ValueCut cutting plotter series.
Identification and description of the plotter's components.
Identification and description of components on the front of the ValueCut plotter.
Identification and description of components on the back of the ValueCut plotter.
An overall view of the ValueCut plotter, highlighting major parts and their functions.
Description of the ports and controls located on the left side of the ValueCut plotter.
Description of the ports and controls located on the right side of the ValueCut plotter.
Important precautions to follow before starting the installation process.
Step-by-step instructions for assembling the stand and flexible media support system.
Instructions for installing the desktop flexible media support system for VC-600.
Detailed steps for installing the optional media basket system on the plotter.
Procedure for installing a new cutting pad when the existing one is worn out.
Step-by-step guide on how to install and adjust the cutting blade in the blade holder.
Instructions for setting the blade length automatically using the plotter's scale.
Connecting the plotter to a computer via various interfaces.
Guide to connecting the ValueCut plotter to a computer using a USB interface.
Steps to completely remove previous versions of the plotter driver from your system.
Instructions for connecting the plotter to a computer via the RS-232 serial port.
Options for transmitting data from the computer to the cutting plotter.
Description of the LCD panel and its keys, functions, and status indicators.
Flowchart and explanation of the plotter's menu options when in online mode.
Flowchart and explanation of the plotter's menu options when in offline mode.
Detailed explanation of each menu item and its function on the control panel.
Proper procedures for loading sheet and roll media onto the plotter.
Step-by-step guide on how to properly load sheet media onto the plotter.
Instructions for loading roll media, including options A and B.
Recommendations for media loading procedures to ensure optimal tracking.
Guidance on performing cut tests to achieve satisfactory cutting results.
Recommended settings and procedures for cutting small letters with high quality.
Using the "AUTO UNROLL MEDIA" function for long plots and recommended settings.
Configuration and settings for the ValueCut series print driver.
Configuration options within the print driver's 'Option' page.
Settings for assigning cutter parameters to different colors (pens) in the driver.
Settings for paper size and unit measurement in the print driver.
Introduction to the Accu-Aligning System (AAS II) for precise contour cutting.
Procedures and guidelines for calibrating the AAS system for accuracy.
Procedure to ensure the sensor recognizes registration marks for accurate cutting.
Guidelines for registration marks to ensure accurate AAS auto-detection.
How the plotter automatically detects material feeding direction for contour cutting.
Using test files to ensure AAS II cutting accuracy on the ValueCut plotter.
Steps for performing accurate contour cutting using the AAS function.
Recommendations for achieving better results with contour cutting.
Recommended methods and precautions for cleaning the cutting plotter.
Procedure for cleaning the grid drum on the cutting plotter.
Instructions for cleaning the rubber pinch rollers to maintain performance.
Troubleshooting steps for common issues when the plotter is not functioning.
Solutions for mechanical or failure issues during plotter operation.
Explanations of error messages displayed on the LCM and recommended actions.
Solutions for common operational issues like media handling and shifting points.
Troubleshooting steps for communication errors between the plotter and computer.
Guidance on resolving issues related to software compatibility and drivers.
Steps to diagnose and resolve issues affecting the quality of the cut.
Definitions of terms like blade, pen, offset, and protrusion length.
Guide on using the CorelDRAW plug-in for contour cutting with registration marks.
Guide on using the Illustrator plug-in for contour cutting with registration marks.
To Next Page