FlexiSTARTER Quick Start Guide ValueCut USER MANUAL
82
VC2E-A-00
8.3 Start up of the FlexiSTARTER
After the installation of the FlexiSTARTER ValueCut Edition, two software
are installed; the FlexiSTARTER that makes it possible to create and edit
cutting date and the Production Manager that allows you to manage cutting
job from the FlexiSTARTER ValueCut and control device of the ValueCut.
Each icon may be present on the desktop.
Double-click on the FlexiSTARTER ValueCut Edition icon to start. Also, double-click on the Production
Manager icon to start.
To Next Page
Loading...
