MUTOH ValueCut II VC2-600 - Important Information; Safety and Operation Precautions

ValueCut USER MANUAL Important Information
3
VC2E-A-00
Important Information
Thank you for purchasing the ValueCut Cutting Plotter.
Before you use the cutting plotter, please make sure that you have read
the safety precautions and instructions below.
Caution
!
SAFETY PRECAUTION
 For safety concern, please always hold the cutter firmly from the bottom while
moving it. Do not move the cutter by clasping the depression area on both sides.
 Do not place your hand close to the tool carriage to prevent your fingers from
being clamped during the operation of the cutting plotter.
O (Correct)
Hold from the bottom
X (Incorrect)
Hold the depression area