Important Information ValueCut USER MANUAL
4
VC2E-A-00
Hazardous moving parts keep fingers and other body parts away!
Do not shake or drop the blade holder, a blade tip can fly out.
During an operation, do not touch any of the moving parts of this machine (such
as the carriage). Also be careful to make sure that clothing and hair do not get
caught.
Always connect the power cable to a grounded outlet.
Always use the accessory power cable which is provided. Do not wire the power
cable so that it becomes bent or caught between objects.
Take power for the printer directly from the power socket (AC 100 V - 120 V or AC
220 V - 240 V). Do not use multiple plugs on the same socket. This could
generate heat and might cause fire.
Keep the tools away from children where they can reach.
To Next Page
Loading...
