ValueCut USER MANUAL Important Information
5
VC2E-A-00
Operation precaution
Always put the pinch rollers within the white marks.
Note:
Never press the top release grip (the release grip is fully pressed when a clip
sound is heard) and pull the bottom release grip at the same time as the
pictures shown below. This will prevent you from disabling the pinch roller as
the stop bar will not reach the correct position and therefore will not be
functioning.
In case the grips clipped together due to your wrong operation, please use a
pair of tweezers to pull out the stop bar when pressing down the top release
grip. Keep the stop bar outside then release the grips as the pictures shown
Pull up bottom to release grip
Press down
O (Correct)
Stop bar
Push
X (Incorrect)
Press down
To Next Page
Loading...
