MAINTENANCE MANUAL
VCE-MM-02
23
Note: When re-installing the Pinch Roller Set, the Cam Roller must be aligned squarely to the
Square Bar.
Note: When aligning the Cam Roller please remember to keep the release grip locked down.
Note: Pinch-roller is color-coded by pressure force. When replacing the pinch-roller, make sure to
replace all the pinch-rollers with the same color.
Replacing the Tool Carriage
The following are those you must follow to successfully replace the Tool Carriage.
To Loosen the Carriage Belt:
Cam Roller
Release Grip
1. Unscrew the 2 retaining screws, but don’t remove them. Then turn the Adjustment
Screw anti-clockwise to loosen the carriage belt.
To Next Page
Loading...
