MUTOH ValueCut VC-600 - Initializing All Settings

MAINTENANCE MANUAL
VCE-MM-02
34
Press "ENTER" key.
Note: Only "AAS Offset X/Y", "Scale Length/Width" can be backed-up.
Note: If you want to Initialize the backup value, please go to Initialize all settings
Initialize all settings
Completely initialize all the settings including backed-up "AAS Offset X/Y", "Scale length/Width"
values.
Press "TOOL SELECT" key and enter to tool setting menu.
Press "
}
" key twice and display the restore menu.
x2
Offline For
System Setup
Offline For
System Setup
1S 72 F 80 O0.250M
Select:{} Ok:ENTER
Restore default ?
Select:{} Ok:ENTER