MUTOH VJ-1324 - Page 30

3 Before using VJ-1324 OPERATION MANUAL
3-12
• When all cleaning cartridges are installed, "Busy-Washing" is displayed on the operation panel,
and the printer starts charging the cleaning fluid.
• When the cleaning fluid has been charged, "Remove Cartridges" is displayed on the operation
panel.
5. Remove all cleaning cartridges.
• "Busy-Washing" is displayed on the operation panel and the printer starts head cleaning.
• When head cleaning is complete, "Wash retry? No" is displayed on the operation panel.
NOTE
• When performing head cleaning again before ink charge, press the [+] or [-] key on the
operation panel to select "Yes", and press the [Enter] key to perform head cleaning.
6. Press the [Enter] key on the operation panel.
No. Name
1 Cleaning cartridge
2 Ink cartridge slots
No. Name
1 Cleaning cartridge
2 Ink cartridge slots
2
1