MUTOH VJ-1324 - Page 32

3 Before using VJ-1324 OPERATION MANUAL
3-14
CAUTION
• Do not perform the following operations during ink filling. If filling is interrupted,
ink will be lost when filling is resumed.
• Do not turn OFF the printer.
• Do not unplug the power cable.
• Do not open the front cover.
• Do not open the maintenance cover.
• Do not raise the media loading lever.
• After the initial ink charge is complete, "Media End" is displayed on the operation panel.
NOTE
• If the printer performs the nozzle check printing immediately after initial ink charge is
complete, the following results may occur.
• Printed lines become blurred.
• The data is partially not printed.
In such cases, follow "6.2.3 Head cleaning" and refill a small amount of ink. Then, check the
printing result.
If there is no improvement in the print result even after refill a small amount of ink, leave the
printer unused for an hour or more. Then, refill a small amount of ink again and check the print
result.
If there is still no improvement, contact your local MUTOH dealer.
3.3.2 Installing high capacity pack adapters (option)
Use the optional high capacity pack adapters to use the 1000ml ink packs on this printer.
Follow the procedure below to install the high capacity pack adapters.
1. Turn the printer ON.