MUTOH VJ-1324 - Media Feed Compensation

VJ-1324 OPERATION MANUAL 4 Handling the printer
4-9
3. Close the front cover.
4.2.6 Media feed compensation
This section explains the Media feed compensation.
The feeding length depends on the media type. The following or similar results may be seen in prints.
• Printed images overlap.
• White lines are printed on images.
The accuracy of media feeding may be improved with the following methods.
1. Display the Dist.Adj menu on the operation panel.
a. Press the [Menu] key on the operation panel.
• "Menu1: Setup>" is displayed on the operation panel.
• The operation panel shifts to the Setup menu display.
b. Press the [>] key on the operation panel.
• "Set1: User Type" is displayed on the operation panel.
c. Press the [Enter] key on the operation panel.
• "User: Type 1" is displayed on the operation panel.
d. Press the [+] key or [-] key on the operation panel to select the media type to use.
e. Press the [Enter] key on the operation panel.
• "**>1: Print Mode" is displayed on the operation panel.
No. Name
1 Front cover
1