MW TOOLS HB240 - Page 4

M1.2.HB240-HB240M.NLFREN 21112017
4
NL
USER’S GUIDE V1.0 201511
- 4 -
1.5 Warning signs
All safety warning signs attached on the machine are for the purpose of drawing the user’s attention to safety operation. The
labels must be kept clean and need to be replaced when they are worn-out or have dropped. Read the explanations of the labels
carefully and try to memorize them.
Ga onmiddellijk weg van
de werkruimte in geval
van valrisico!
Plaats het voertuig met
het zwaartepunt in
het midden tussen de
kolommen!
Blijf niet in de buurt van
de hefbrug tijdens de
stijging of de daling!
Beweeg het voertuig niet
wanneer op de hefbrug!
Reparaties alleen door
gekwaliceerd personeel!
Houd uw voeten weg van
de brug tijding de daling!
Gebruik van het
toestel alleen door
gekwaliceerd personeel!
Alleen gekwaliceerd
personeel toegelaten in
de werkruimte!
Gebruik de hefpunten
die door de fabrikant van
het voertuig aangeduid
worden!
Gebruik
veiligheidssteunen tijdens
het werk onder het
voertuig!
Gebruik adapters voor
een betere greep.
Controleer dat de adapter
correct geplaatst is!
Overbelast de hefbrug
niet!
AANDACHT
USER’S GUIDE V1.2 201503
- 4 -
1.5 Warning signs
All safety warning signs at tached on t he machine are for the purpose of drawing the user’s attention to safety o peration. The
labels must be kept clean and need to be replaced when they are worn-out or have dropped. Read the explanations of the labels
carefully and try to memorize them.
AANDACHT
USER’S GUIDE V1.2 201503
- 4 -
1.5 Warning signs
All safety warning signs at tached on t he machine are for the purpose of drawing the user’s attention to safety o peration. The
labels must be kept clean and need to be replaced when they are worn-out or have dropped. Read the explanations of the labels
carefully and try to memorize them.
AANDACHT
USER’S GUIDE V1.2 201503
- 4 -
1.5 Warning signs
All safety warning signs at tached on t he machine are for the purpose of drawing the user’s attention to safety o peration. The
labels must be kept clean and need to be replaced when they are worn-out or have dropped. Read the explanations of the labels
carefully and try to memorize them.
AANDACHT
USER’S GUIDE V1.2 201503
- 4 -
1.5 Warning signs
All safety warning signs at tached on t he machine are for the purpose of drawing the user’s attention to safety o peration. The
labels must be kept clean and need to be replaced when they are worn-out or have dropped. Read the explanations of the labels
carefully and try to memorize them.
AANDACHT
USER’S GUIDE V1.2 201503
- 4 -
1.5 Warning signs
All safety warning signs at tached on t he machine are for the purpose of drawing the user’s attention to safety o peration. The
labels must be kept clean and need to be replaced when they are worn-out or have dropped. Read the explanations of the labels
carefully and try to memorize them.
AANDACHT
USER’S GUIDE V1.2 201503
- 4 -
1.5 Warning signs
All safety warning signs at tached on t he machine are for the purpose of drawing the user’s attention to safety o peration. The
labels must be kept clean and need to be replaced when they are worn-out or have dropped. Read the explanations of the labels
carefully and try to memorize them.
AANDACHT
USER’S GUIDE V1.2 201503
- 4 -
1.5 Warning signs
All safety warning signs at tached on t he machine are for the purpose of drawing the user’s attention to safety o peration. The
labels must be kept clean and need to be replaced when they are worn-out or have dropped. Read the explanations of the labels
carefully and try to memorize them.
AANDACHT
USER’S GUIDE V1.2 201503
- 4 -
1.5 Warning signs
All safety warning signs at tached on t he machine are for the purpose of drawing the user’s attention to safety o peration. The
labels must be kept clean and need to be replaced when they are worn-out or have dropped. Read the explanations of the labels
carefully and try to memorize them.
AANDACHT
USER’S GUIDE V1.2 201503
- 4 -
1.5 Warning signs
All safety warning signs at tached on t he machine are for the purpose of drawing the user’s attention to safety o peration. The
labels must be kept clean and need to be replaced when they are worn-out or have dropped. Read the explanations of the labels
carefully and try to memorize them.
AANDACHT
USER’S GUIDE V1.2 201503
- 4 -
1.5 Warning signs
All safety warning signs at tached on t he machine are for the purpose of drawing the user’s attention to safety o peration. The
labels must be kept clean and need to be replaced when they are worn-out or have dropped. Read the explanations of the labels
carefully and try to memorize them.
AANDACHT
USER’S GUIDE V1.2 201503
- 4 -
1.5 Warning signs
All safety warning signs at tached on t he machine are for the purpose of drawing the user’s attention to safety o peration. The
labels must be kept clean and need to be replaced when they are worn-out or have dropped. Read the explanations of the labels
carefully and try to memorize them.
AANDACHT
USER’S GUIDE V1.2 201503
- 4 -
1.5 Warning signs
All safety warning signs at tached on t he machine are for the purpose of drawing the user’s attention to safety o peration. The
labels must be kept clean and need to be replaced when they are worn-out or have dropped. Read the explanations of the labels
carefully and try to memorize them.
copyrighted document - all rights reserved by FBC