2201Q4JE-MY-C9-N_2018.01.
Chapter 2 Compressor Specifications and Structure
Compound 2-stage Screw Compressor 4032**C 2.3 Compressor Specifications
2-2
2.3 Compressor Specifications
2.3.1 Specifications
Table 2-1 4032**C Screw Compressor Specifications (1/2)
Low-stage swept volume
@3550 min
-1
/2950 min
-1
High-stage swept volume
@3550 min
-1
/2950 min
-1
Ammonia, Hydrofluorocarbon, Hydrocarbons, Other.
Capacity control (Actual load)
Counterclockwise viewed from motor
*Note1: Product mass of 4032XLLLC is a data of the specifications for cast steel casings.
Table 2-2 4032**C Screw Compressor Specifications (2/2)
Low-stage swept volume
@3550 min
-1
/2950 min
-1
High-stage swept volume
@3550 min
-1
/2950 min
-1
Ammonia, Hydrofluorocarbon, Hydrocarbons, Other.
Capacity control
(Actual load)
Counterclockwise viewed from motor
Unless otherwise noted, the pressure unit MPa represents the gauge pressure in this manual.
For limits of working temperature and pressure, refer to Section2.3.2 "Operation Limits" in this
Chapter.
For sizes of connecting piping, refer to Section 2.3.2 "Outer Dimensions" or Section 3..2.4 Table
3-1 " List of Connecting Pipes (Compressor)" in this manual.
To Next Page
Loading...
Need help?
General
