2205B0JE-DA-J-N_2014.05.
7 Related Documents
Screw Compressor J-series 7.1 Development View and Configuration Table of the Parts
7-21
Part
No.
Part name
280J
Type, etc.
Part code No. Quantity/unit
Explosion proo
Standard for Propane S M L
611 Sleeve, shower flashing 1
657 O-ring JIS B2401 G140 PAH81-140 PC12-140 1
658 Retaining ring JIS B2804 H140 NG11-140 1
709 Vi position sensor rod housing CS70900-J280 1
711 Spring
O.D 13, wire
diameter 1.6
Free length 100
CS71100-J170 1
712 Vi position sensor rod CS71200-J280 1
713 O-ring JIS B2401 P12 PAH80-012 PC11-140 1
714 O-ring JIS B2401 P6 PAH80-006 PC11-006 1
715 Plug, Vi position sensor rod CS71500-J170 1
716 Retaining ring
JIS B2804 E snap
ring 4
NG13-004 1
717 O-ring JIS B2401 G25 PAH81-025 PC12-025 1
718
Gland, Vi position sensor rod
housing
CS71800-J170 1
719 Hexagon socket head cap screw M6×25 NB35406-025 4
720 Vi position sensor support CS72000-J170 1
721 Potentiometer
Midori Precisions
LP-10FB
CS12907
-J1701 1
722 Hexagon socket head cap screw M3×10 NB35403-010 2
723 Hexagon socket head cap screw M6×25 NB35406-025 2
724 Vi position sensor box 1
725 Packing, Sensor box 1
726 Hexagon socket head cap screw M5×15 NB35405-015 4
794 Vi position sensor assembly 1
727 I plug 170J* E plug CS72700-J170 1
728-1 E plug CS72810-J280 1
728-2 E plug gland CS72820-J280 1
728-3 E plug flange CS72830-J280 1
728-4 O-ring JIS B2401 G65 PAH81-065 PC12-065 1
728-5 Hexagon head screw M16×45 NB111016-045 2
731-A Plug R1/4 NF06-008 1
731-B Plug R1/4 NF06-008 1
731-C Plug R1/8 NF06-004 1
732-A Plug R1/2 NF06-015 1
732-B Plug R1/2 NF06-015 1
733 Plug R1/2 NF06-015 1
734-1
Inner cover M, balance piston
cover
CS73400-J280M 1
734-2 Inner cover F, balance piston cover
Inner cover, balance
piston cover for
220J*
CS73400-J280F 1
736 Partition plate, suction cover CS73600-J280 1
744 O-ring JIS B2401 G90 PAH81-090 PC12-090 1
745 Rivet 3 dia.×6 4
● As for the part code of the O-ring, the material of the explosion-proof for standard
specification is HNBR and the material of the explosion-proof for propane
specification is FKM.
For O-rings material other than HNBR or FKM, the part code No. are differ depending
on the material.
For customers using O-rings other than the standard material, contact
before purchasing the O-ring.
To Next Page
Loading...
Need help?
General
