MZ electronic EV-020 User Manual

EV-020 Rev. 11 – 2014
English
22
Auto Down
Enables the automatic anchor lowering
procedure, at the desired height, with the
pressing (for at least 3 seconds) of the keys
and .
Settable value: 5 - 10 - 15…40 (metres or
feet).
Select with
Select value with
Confirm with
Load Default
This function allows the User to revert to the
original factory default settings, thus erasing
all settings memorised.
This command must only be used in the
event of programming errors.
Select with
= Yes = No
Confirm with
Exit
To return to the settings menu.
Confirm with
Settings menu
Settings
C o n t r a s t
L ig h t
B k L i g h t T i m e 3 0
K e y b . B e e p Ye s
E x i t
Use the (DOWN) or (UP) key to move around the parameters.
Contrast
By enabling this function it is possible to start
the display contrast programming procedure.
Select with
Select value with
Confirm with
Light
By enabling this function it is possible to start
the display luminous intensity programming
procedure.
Select with
Select value with
Confirm with
BackLight Time
This function allows the user to set the
backlight on time during which the display
remains lit after the last command given
(default value 30 seconds).
Select with
Select value with
Confirm with
Keyboard Beep
This function allows the user to enable or
disable the buzzer (emitted each time a key
is pressed).
Select with
= No = Yes
Confirm with
Exit
To return to the settings menu.
Confirm with

MZ electronic EV-020 Specifications

General

Brand	MZ electronic
Model	EV-020
Category	Cash Counter
Language	English