EasyManua.ls Logo

MZ electronic EV-030 - User Manual

MZ electronic EV-030
120 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Istruzioni per l’uso
Instructions for use
Instructions d'utilisation
Gebrauchsanweisung
Instrucciones de uso
CONTAMETRI __ pagina 3
CHAIN COUNTER __ page 26
COMPTEUR MÉTRIQUE __ page 49
METERZÄHLER __ Seite 72
CUENTAMETROS __ página 95
EV-030
Rev. 07 – 2008

Table of Contents

Questions and Answers

  • S
    shallAug 4, 2025
    What to do if MZ electronic EV-030 doesn't receive signal from the magnetic sensor?
    • B
      Brett LoveAug 4, 2025
      If the MZ electronic Cash Counter isn't receiving a signal from the magnetic sensor when the UP or DOWN keys are pressed, several issues could be the cause. First, check the sensor's electrical connections and ensure the sensor is operating correctly; if not, replace it. Also, verify the position and distance (3 mm) between the sensor and magnet. Finally, inspect the operation of the electrical installation.
  • A
    Allison SullivanAug 13, 2025
    Why MZ electronic EV-030 power supply voltage is low?
    • P
      paulclayAug 13, 2025
      If the power supply voltage of your MZ electronic Cash Counter is lower than 10V, verify the battery charge or the operation of the electrics system.
  • D
    Derek DavidsonAug 25, 2025
    What to do if MZ electronic Cash Counter doesn't receive signal from magnetic sensor?
    • J
      Jacqueline DiazAug 25, 2025
      If your MZ electronic Cash Counter isn't receiving a signal from the magnetic sensor for more than 5 seconds, check the sensor's electrical connections and ensure it's operating correctly. If the sensor is faulty, replace it. Also, verify the sensor and magnet's position on the gipsy and their distance (3 mm). Finally, check the operation of the electrical installation or anchor windlass.

Summary

Description

Technical data

Components

Installation

Installing the magnet on the anchor windlass

Details on how to properly attach the magnet to the windlass gipsy.

Installing the magnetic sensor for vertical shaft anchor windlasses

Procedure for fitting the magnetic sensor to vertical shaft anchor windlasses.

Installing the magnetic sensor for horizontal shaft anchor windlasses

Procedure for fitting the magnetic sensor to horizontal shaft anchor windlasses.

Installing the chain counter

Steps to mount the chain counter unit onto the dashboard.

Connections

Starting up

Chain counter setting menu

Measurement menu

Alarm and functions menu

Settings menu

Language menu

Sensor calibration menu

Standard and X.. Project series sensor menu

Menu for standard sensors placed on the barbotin.

1000-1500-2000 W Project series sensor menu

Menu for project series sensors placed on the motor.

Check menu

Instrument calibration

Use

Measurement reset

Procedure for resetting the measurement count.

Automatic casting of the anchor

Enabling and executing the automatic anchor lowering function.

Troubleshooting

Warranty

SCHEMA ELETTRICO; ELECTRICAL DRAWING

MZ electronic EV-030 Specifications

General IconGeneral
BrandMZ electronic
ModelEV-030
CategoryCash Counter
LanguageEnglish

Related product manuals